Here is the ZTE Blade Q firmware to be installed on your device. On the ZTE Blade Q stock ROM you will find the flash file, flash tool, IMEI and manual instructions to flash it.
And on this post you will not only find the download zip file for ZTE Blade Q firmware but you will also be guided to flash the stock ROM as well.
The benefits installing the stock ROM are.
- You will restore your device’s warranty — Only if it’s valid.
- You can fix technical errors such as bootloop or soft-bricked.
- You will revert your device’s to its stock settings.
- You will make it looks like the first time you bought it.
Make backup before flashing the stock ROM because the process of firmware flashing will erase your personal data.
Download ZTE Blade Q stock ROM
See the detail file information.
- ZTE Model: ZTE Blade Q
- Android ROM Version: 4.2.2
- Firmware File Size: 483 MB
Instructions to flash ZTE Blade Q firmware
Before going to the steps, here are what you need to have and do first.
- A computer.
- A USB data cable.
- SP Flash Tool.
- Backup your personal data.
Notes. Make sure you follow the entire steps without skipping any of them or you might end up bricking your device.
Step 1 — Download SP Flash Tool and extract it to your computer.
Step 2 — On your computer, head to the SP Flash Tool folder, then find and right-click on Flash Tool to select Run As Administrator, this will open the SP Flash Tool.
Step 3 — Once SP Flash Tool is opened, choose Download tab, and then select the Scatter Loading button to grab your Scatter File (.txt extension) from your computer.
Step 4 — You need to click the Android_Scatter file.
Step 5 — SP Flash Tool will load the Scatter File.
Step 6 — After the scatter file is loaded by SP Flash Tool, you can now click the Download button.
Step 7 — Now turn off your Android device — and remove its battery if it’s removable and if not just turn it off.
Step 8 — You need to connect your Android device to PC now using a USB data cable.
Step 9 — Now press Volume UP or Volume Down to fasten the connection between your Android device and computer.
Step 10 — When your Android device is connected, then SP Flash Tool will begin flashing your Android scatter file and will show a progress bar in yellow color.
Step 11 — This is the picture showing that the scatter file was successfully installed on your Android device.
Step 12 — You can now disconnect your device from your computer.
Notes
{#} Make backup first. Before you flash the above firmware to your device it’s recommended to firstly make necessary backups.
{#} Flash IMEI. You need to also flash the original IMEI after flashing the firmware to your ZTE device.
{#} More firmware. You can go to our ZTE stock ROM page that’s dedicated to find all the available ZTE official firmware.
{#} Credits. ZTE firmware is released by ZTE to help its users fixing or restoring their device.
