Sabtu, 23 Juni 2018

ZTE Blade L110 Stock ROM Firmware

Here is the ZTE Blade L110 firmware to be installed on your device. On the ZTE Blade L110 stock ROM you will find the flash file, flash tool, IMEI and manual instructions to flash it.

And on this post you will not only find the download zip file for ZTE Blade L110 firmware but you will also be guided to flash the stock ROM as well.

ZTE Firmware

The benefits installing the stock ROM are.
  • You will restore your device's warranty -- Only if it's valid.
  • You can fix technical errors such as bootloop or soft-bricked.
  • You will revert your device's to its stock settings.
  • You will make it looks like the first time you bought it.
Make backup before flashing the stock ROM because the process of firmware flshing will erase your personal data.

Download ZTE Blade L110 stock ROM

See the detail file information.
  • ZTE Model: ZTE Blade L110
  • Android ROM Version: 5.1
  • Firmware File Size: 570 MB


Instructions to flash ZTE Blade L110 firmware

Before going to the steps, here are what you need to have and do first.
  • A computer.
  • A USB data cable.
  • SPD Flash Tool.
  • Backup your personal data.

Notes. Make sure you follow the entire steps without skipping any of them or you might end up bricking your device.
Step 1. Download SPD Flash Tool, extract it, you can ignore this step if you already have done it.

Step 2. Now find and download the stock ROM firmware based on PAC or P5C that to be installed on your SpreadTrum Chipset device.

Step 3. On your computer, head to the folder where you save the SPD Flash Tool. Within the folder you need to find and click on the file named UpgradeDownload.exe / ResearchDownload.exe.

UpgradeDownload.exe / ResearchDownload.ex

Step 4. SPD Flash Tool will be opened, now if you see the interface like this then power off your Android SpreadTrum Chipset device then connect it to your computer.

How To Use SPD Flash Tool

Step 5. Once your device is connected to computer, click the Load Packed button, then search the .pac file on your computer.

How To Use SPD Flash Tool I

How To Use SPD Flash Tool II

Step 6. After you have added .pac file to SPD Flash Tool, you can click Start Downloading button to begin the flashing process.

How To Use SPD Flash Tool

Step 7. Now the flashing process begins, during this moment, do nothing but wait till the entire processes done. Your device will perform the automatic reboot. The blue bar appears telling you the flashing progress.

How To Use SPD Flash Tool IV

Step 8. If done you will see the Previous Passed green notification from SPD Flash Too.

How To Use SPD Flash Tool V

Step 9. Finish.


{#} Make backup first. Before you flash the above firmware to your device it's recommended to firstly make necessary backups.

{#} Flash IMEI. You need to also flash the original IMEI after flashing the firmware to your ZTE device.

{#} More firmware. You can go to our ZTE stock ROM page that's dedicated to find all the available ZTE official firmware.

{#} Credits. ZTE firmware is released by ZTE to help its users fixing or restoring their device.