Senin, 18 Juni 2018

Yu Yunicorn YU5530 Stock ROM Firmware

Download Yu Yunicorn YU5530 stock ROM firmware (Flash File) that comes with zip file containing the flash tool, flash file, original USB Drivers and also the manual guides to install the YU stock ROM firmware.

If you install the Yu Yunicorn YU5530 stock ROM firmware on your device then you will fix the possible technical errors your device might have such as bootloop, soft-bricked and other errors. You are able to restore your device's warranty if flashing the stock ROM firmware.
Download YU Stock ROM Firmware

Benefits for installing the stock ROM firmware

  • Can fix your device's bootloop or soft-bricked.
  • Can bring back your device's to its original stock ROM state.
  • Can restore your device's warranty if it's valid.
  • Can make your device like new again.

Download Yu Yunicorn YU5530 stock ROM firmware (flash file)


See the detail file information.
  • File Name: Yu Yunicorn YU5530 Stock Android ROM
  • Android Version: Android 5.1 Firmware
  • Total Size: 1.12 GB

Download

  • File Name: Yu Yunicorn YU5530 Stock Android ROM
  • Android Version: Android 6.0 Firmware
  • Total Size: 1.09 GB

Download

Instructions to flash Yu Yunicorn YU5530 stock ROM firmware

Before going to the steps, here are what you need to have and do first.

Notes. Make sure you follow the entire steps without skipping any of them or you might end up bricking your device.
Step 1 -- Download SP Flash tool and extract it to your computer.

Step 2 -- On your computer, head to the SP Flash Tool folder, then find and right-click on Flash Tool to select Run As Administrator, this will open the SP Flash Tool.

Open SP Flash Tool

Step 3 -- Once SP Flash Tool is opened, choose Download tab, and then select the Scatter Loading button to grab your Scatter File (.txt extension) from your computer.

Select Scatter File MTK

Step 4 -- You need to click the Android_Scatter file.

SP Flash Tool Scatter File

Step 5 -- SP Flash Tool will load the Scatter File.

Step 6 -- After the scatter file is loaded by SP Flash Tool, you can now click the Download button.

SP Flash Tool Download

Step 7 -- Now turn off your Android device -- and remove its battery if it's removable and if not just turn it off.

Power Off Android Device

Step 8 -- You need to connect your Android device to PC now using a USB data cable.

Connect Android To PC

Step 9 -- Now press Volume UP or Volume Down to fasten the connection between your Android device and computer.

Step 10 -- When your Android device is connected, then SP Flash Tool will begin flashing your Android scatter file and will show a progress bar in yellow color.

Yellow Progress Bar SP Flash Tool MTK

Step 11 -- This is the picture showing that the scatter file was successfully installed on your Android device.

Successfully Installed Scatter File SP Flash Tool

Step 12 -- You can now disconnect your device from your computer.


Notes

{1} Make backup first. The YU stock ROM firmware will erase your personal data make sure you firstly back your data before installing the software.

{2} Flash the original IMEI. Once you have installed the YU stock ROM firmware then proceed with installing the original YU IMEI for your device afterward.

{3} More stock ROM firmware. If you have a different YU model then please to visit our YU stock ROM firmware page and on there you probably will find your preferred model.

{4} Credits. YU stock ROM firmware is officially created, optimized, developed and distributed by YU. Therefore all credits should be given to the company for making this very handy software available for us all to use.


EmoticonEmoticon