Sabtu, 09 Juni 2018

Xiaomi Redmi Pro Stock ROM Firmware

Download Xiaomi Redmi Pro stock ROM firmware and to learn on how to flash Xiaomi Redmi Pro firmware. On this post we share flash tool, flash file, manual flashing instructions and USB Drivers for Redmi Pro.

On this post you will be guided to install Xiaomi Redmi Pro firmware to bring back your device to its original settings and fix any possible technical errors your device might experience now.

Xiaomi Stok ROM Firmware

Or if you want to restore your device's warranty then you can use the Xiaomi Redmi Pro stock ROM. But this only applies if your device's warranty is still valid.

And you are highly recommended to firstly backup your personal data before installing the stock ROM because the process will erase them all and nothing can bring them back.

Benefits of flashing Xiaomi Redmi Pro stock ROM firmware

  • It will restore your Android devices to the factory settings or stock state.
  • It will restore your smart device's warranty.
  • It will fix soft-bricked.
  • It will fix bootloop.

Download Xiaomi Redmi Pro stock ROM

See the detail file information.
  • File Name:
  • Total Size: 1.8 GB


Before beginning with the flashing tutorials, then please to take a look of things you need to have and do beforehand.
  • A computer.
  • A USB data cable.
  • Backup your personal data.

How to flash Xiaomoi Redmi Pro Stock ROM Firmware

Please notes. Please to follow the entire steps before beginning to flash your Xiaomi smart device or else you may end up bricking your smart device.
Step 1 -- Download SP Flash tool and extract it to your computer.

Step 2 -- On your computer, head to the SP Flash Tool folder, then find and right-click on Flash Tool to select Run As Administrator, this will open the SP Flash Tool.

Open SP Flash Tool

Step 3 -- Once SP Flash Tool is opened, choose Download tab, and then select the Scatter Loading button to grab your Scatter File (.txt extension) from your computer.

Select Scatter File MTK

Step 4 -- You need to click the Android_Scatter file.

SP Flash Tool Scatter File

Step 5 -- SP Flash Tool will load the Scatter File.

Step 6 -- After the scatter file is loaded by SP Flash Tool, you can now click the Download button.

SP Flash Tool Download

Step 7 -- Now turn off your Android device -- and remove its battery if it's removable and if not just turn it off.

Power Off Android Device

Step 8 -- You need to connect your Android device to PC now using a USB data cable.

Connect Android To PC

Step 9 -- Now press Volume UP or Volume Down to fasten the connection between your Android device and computer.

Step 10 -- When your Android device is connected, then SP Flash Tool will begin flashing your Android scatter file and will show a progress bar in yellow color.

Yellow Progress Bar SP Flash Tool MTK

Step 11 -- This is the picture showing that the scatter file was successfully installed on your Android device.

Successfully Installed Scatter File SP Flash Tool

Step 12 -- You can now disconnect your device from your computer.

Important notes

Take backup first. Be sure you firstly make necessary backups before starting to install the Xiaomi stock ROM to your Xiaomi device.

Credits. The Xiaomi stock ROM firmware informed on this post is created, optimized, developed and distributed by Xiaomi Inc. So all credits must be given to the company for releasing it to us.