Download Xiaomi Redmi Note 3G stock ROM firmware and to learn on how to flash Xiaomi Redmi Note 3G firmware. On this post we share flash tool, flash file, manual flashing instructions and USB Drivers for Redmi Note 3G.
On this post you will be guided to install Xiaomi Redmi Note 3G firmware to bring back your device to its original settings and fix any possible technical errors your device might experience now.
Or if you want to restore your device’s warranty then you can use the Xiaomi Redmi Note 3G stock ROM. But this only applies if your device’s warranty is still valid.
And you are highly recommended to firstly backup your personal data before installing the stock ROM because the process will erase them all and nothing can bring them back.
Benefits of flashing Xiaomi Redmi Note 3G stock ROM firmware
- It will restore your Android devices to the factory settings or stock state.
- It will restore your smart device’s warranty.
- It will fix soft-bricked.
- It will fix bootloop.
Download Xiaomi Redmi Note 3G stock ROM
See the detail file information.
- File Name: Xiaomi_Redmi_Note_3G_MT6592_JHDCNBL42.0_2014018_China_4.2.2.zip
- Total Size: 586.59 MB
Before beginning with the flashing tutorials, then please to take a look of things you need to have and do beforehand.
- A computer.
- A USB data cable.
- Backup your personal data.
How to flash Xiaomoi Redmi Note 3G Stock ROM Firmware
Please notes. Please to follow the entire steps before beginning to flash your Xiaomi smart device or else you may end up bricking your smart device.
Step 1 — Download SP Flash tool and extract it to your computer.
Step 2 — On your computer, head to the SP Flash Tool folder, then find and right-click on Flash Tool to select Run As Administrator, this will open the SP Flash Tool.
Step 3 — Once SP Flash Tool is opened, choose Download tab, and then select the Scatter Loading button to grab your Scatter File (.txt extension) from your computer.
Step 4 — You need to click the Android_Scatter file.
Step 5 — SP Flash Tool will load the Scatter File.
Step 6 — After the scatter file is loaded by SP Flash Tool, you can now click the Download button.
Step 7 — Now turn off your Android device — and remove its battery if it’s removable and if not just turn it off.
Step 8 — You need to connect your Android device to PC now using a USB data cable.
Step 9 — Now press Volume UP or Volume Down to fasten the connection between your Android device and computer.
Step 10 — When your Android device is connected, then SP Flash Tool will begin flashing your Android scatter file and will show a progress bar in yellow color.
Step 11 — This is the picture showing that the scatter file was successfully installed on your Android device.
Step 12 — You can now disconnect your device from your computer.
Take backup first. Be sure you firstly make necessary backups before starting to install the Xiaomi stock ROM to your Xiaomi device.
Credits. The Xiaomi stock ROM firmware informed on this post is created, optimized, developed and distributed by Xiaomi Inc. So all credits must be given to the company for releasing it to us.