Jumat, 22 Juni 2018

Download Zelta A100 Stock ROM Firmware

Download Zelta A100 stock ROM firmware (Flash File) and learn to install Zelta A100 firmware from this post. On the firmware zip file you will find the flash file, flash tool, the original stock ROM and manual guides to install the stock ROM file.

You should use this Zelta A100 stock ROM in case you need to restore your Zelta device to the original settings or simply want to fix the technical errors such as soft-bricked or just want to bring back the lost device's warranty.
Download Zelta Stock ROM Firmware (Flash File)

Benefits for installing the stock ROM firmware

  • Fixing bootloop or soft-bricked to your device.
  • Restoring warranty of your device.
  • Bringing your device back to its stock settings.
  • Making your device's like new.

Download Zelta A100 stock ROM firmware (flash file)


See the detail file information.
  • File Name: Zelta A100 Stock Android ROM
  • Total Size: 885 MB

Download

Instructions to flash Zelta A100 stock ROM firmware

Before going to the steps, here are what you need to have and do first.

Notes. Make sure you follow the entire steps without skipping any of them or you might end up bricking your device.
Step 1 -- Download SP Flash tool and extract it to your computer.

Step 2 -- On your computer, head to the SP Flash Tool folder, then find and right-click on Flash Tool to select Run As Administrator, this will open the SP Flash Tool.

Open SP Flash Tool

Step 3 -- Once SP Flash Tool is opened, choose Download tab, and then select the Scatter Loading button to grab your Scatter File (.txt extension) from your computer.

Select Scatter File MTK

Step 4 -- You need to click the Android_Scatter file.

SP Flash Tool Scatter File

Step 5 -- SP Flash Tool will load the Scatter File.

Step 6 -- After the scatter file is loaded by SP Flash Tool, you can now click the Download button.

SP Flash Tool Download

Step 7 -- Now turn off your Android device -- and remove its battery if it's removable and if not just turn it off.

Power Off Android Device

Step 8 -- You need to connect your Android device to PC now using a USB data cable.

Connect Android To PC

Step 9 -- Now press Volume UP or Volume Down to fasten the connection between your Android device and computer.

Step 10 -- When your Android device is connected, then SP Flash Tool will begin flashing your Android scatter file and will show a progress bar in yellow color.

Yellow Progress Bar SP Flash Tool MTK

Step 11 -- This is the picture showing that the scatter file was successfully installed on your Android device.

Successfully Installed Scatter File SP Flash Tool

Step 12 -- You can now disconnect your device from your computer.


Notes

{1} Make backup first. Installing the Zelta stock ROM firmware flash file will wipe out your existing personal data therefore I highly recommend you to firstly make necessary backups beforehand.

{2} Flash the original IMEI. After you have successfully installed the Zelta stock ROM firmware flash file then you need to also install the original IMEI afterward.

{3} More stock ROM firmware. In case you have a different Zelta device then I invite you to visit our dedicated page namely Zelta stock ROM firmware flash file and find your preferred flash file there.

{4} Credits. Zelta stock ROM firmware (flash file) is officially created, optimized, developed and distributed by Zelta to which all credits must be given to the company for making these very useful software available for us all to use.


EmoticonEmoticon