Senin, 30 April 2018

Vivo S3 Plus Firmware

Vivo S3 Plus firmware contains flash file, flash tool and also driver for your device. With this firmware to recover your device due to bootloop.

You will also be guided to install the Vivo stock ROM firmware from our dedicated tutorial section provided on this post.
Vivo Stock ROMs

Features of stock ROM

  • Can restore your Android devices to its stock state.
  • Can restore the warranty of your Android devices.
  • Can fix soft-bricked.
  • Can fix bootloop.

Download Vivo S3 Plus stock ROM


See the detail file information.
  • Android Version: Android 4.0.4 Firmware.
  • Size: 426 MB.

Download

Instructions to flash Vivo S3 Plus firmware

Before going to the steps, here are what you need to have and do first.
  • A computer.
  • A USB data cable.
  • SP Flash Tool.
  • Backup your personal data.

Notes. Make sure you follow the entire steps without skipping any of them or you might end up bricking your device.
Step 1 -- Download SP Flash tool and extract it to your computer.

Step 2 -- On your computer, head to the SP Flash Tool folder, then find and right-click on Flash Tool to select Run As Administrator, this will open the SP Flash Tool.

Open SP Flash Tool

Step 3 -- Once SP Flash Tool is opened, choose Download tab, and then select the Scatter Loading button to grab your Scatter File (.txt extension) from your computer.

Select Scatter File MTK

Step 4 -- You need to click the Android_Scatter file.

SP Flash Tool Scatter File

Step 5 -- SP Flash Tool will load the Scatter File.

Step 6 -- After the scatter file is loaded by SP Flash Tool, you can now click the Download button.

SP Flash Tool Download

Step 7 -- Now turn off your Android device -- and remove its battery if it's removable and if not just turn it off.

Power Off Android Device

Step 8 -- You need to connect your Android device to PC now using a USB data cable.

Connect Android To PC

Step 9 -- Now press Volume UP or Volume Down to fasten the connection between your Android device and computer.

Step 10 -- When your Android device is connected, then SP Flash Tool will begin flashing your Android scatter file and will show a progress bar in yellow color.

Yellow Progress Bar SP Flash Tool MTK

Step 11 -- This is the picture showing that the scatter file was successfully installed on your Android device.

Successfully Installed Scatter File SP Flash Tool

Step 12 -- You can now disconnect your device from your computer.


Notes

{#} Make backup first. Before you flash the above firmware to your device it's recommended to firstly make necessary backups.

{#} Flash IMEI. You need to also flash the original IMEI after flashing the firmware to your Vivo device.

{#} More firmware. You can go to our Vivo stock ROM page that's dedicated to find all the available Vivo official firmware.

{#} Credits. Vivo firmware is released by Vivo to help its users fixing or restoring their device.


EmoticonEmoticon