Here is the Alcatel One Touch Fierce 7024W firmware that you can download and install on your device. We also provide tutorial to install the Alcatel One Touch Fierce 7024W stock ROM from our dedicated tutorial section provided on this post.
The benefits of installing Alcatel stock ROM is of course to bring your phone back to its original settings. And then to fix any possible technical errors such as bootloop, soft bricked and etc.
So you are recommended to install the Alcatel OT Fierce 7024W stock ROM and that will also erase your existing personal data, therefore make backup first.
And let’s download and install the stock ROM by continuing reading this post right now.
Download Alcatel One Touch Fierce 7024W firmware (Flash file)
See the following stock ROM information.
- File name of stock ROM: Alcatel_OneTouch_Fierce_7024W_MT6589.zip.
- Android OS version: Android 4.2.2.
- File size: 852 MB.
How to flash Alcatel One Touch Fierce 7024W firmware using SP Flash Tool
Before going to the steps, here are what you need to have and do first.
- A computer.
- A USB data cable.
- SP Flash Tool.
- Backup your personal data.
Notes. Make sure you follow the entire steps without skipping any of them or you might end up bricking your device.
Step 1 — Download SP Flash tool and extract it to your computer.
Step 2 — On your computer, head to the SP Flash Tool folder, then find and right-click on Flash Tool to select Run As Administrator, this will open the SP Flash Tool.
Step 3 — Once SP Flash Tool is opened, choose Download tab, and then select the Scatter Loading button to grab your Scatter File (.txt extension) from your computer.
Step 4 — You need to click the Android_Scatter file.
Step 5 — SP Flash Tool will load the Scatter File.
Step 6 — After the scatter file is loaded by SP Flash Tool, you can now click the Download button.
Step 7 — Now turn off your Android device — and remove its battery if it’s removable and if not just turn it off.
Step 8 — You need to connect your Android device to PC now using a USB data cable.
Step 9 — Now press Volume UP or Volume Down to fasten the connection between your Android device and computer.
Step 10 — When your Android device is connected, then SP Flash Tool will begin flashing your Android scatter file and will show a progress bar in yellow color.
Step 11 — This is the picture showing that the scatter file was successfully installed on your Android device.
Step 12 — You can now disconnect your device from your computer.