Senin, 30 April 2018

Alcatel One Touch Pop C5 Firmware

Here is the Alcatel One Touch Pop C5 firmware that you can download and install on your device. We also provide tutorial to install the Alcatel One Touch Pop C5 stock ROM from our dedicated tutorial section provided on this post.

The benefits of installing Alcatel stock ROM is of course to bring your phone back to its original settings. And then to fix any possible technical errors such as bootloop, soft bricked and etc.

Alcatel Stock ROM Firmware

So you are recommended to install the Alcatel OT Pop C5 stock ROM and that will also erase your existing personal data, therefore make backup first.

And let's download and install the stock ROM by continuing reading this post right now.

Download Alcatel One Touch Pop C5 firmware (Flash file)


See the following stock ROM information.
  • File name of stock ROM: Alcatel_One_Touch_Pop_C5_OT-5036D.zip.
  • Android OS version: Android 4.2.
  • File size: 311 MB.

Download

How to flash Alcatel One Touch Pop C5 firmware using SP Flash Tool

Before going to the steps, here are what you need to have and do first.
  • A computer.
  • A USB data cable.
  • SP Flash Tool.
  • Backup your personal data.

Notes. Make sure you follow the entire steps without skipping any of them or you might end up bricking your device.
Step 1 -- Rename the firmware zip file to be Update.zip.

Update Zip

Step 2 -- Now enable USB Debugging of your Android device by going to Settings -> Developer Options -> USB Debugging.

In case the Developer Options is not enabled, then your can head to Settings -> About Phone -> Tap the  Build Number for about 5 or 7 times to enable the Developer Options.

Enable USB Debugging Mode Android

Step 3 -- You can now connect your Android device to computer using the USB Data Cable, then transfer the “Update.zip” file to your Android device's storage / SD Card.

Step 4 -- After the stock ROM firmware is fully transferred to your Android device then disconnect your Android device from computer.

Step 5 -- Now you can power off your Android device to boot into the Recovery Mode, do so by holding and pressing the Volume Up + Power buttons together. After your Android device is in recovery mode then choose wipe cache partition.

Wipe Cache Partition Recovery

Step 6 -- You can now choose the update / recovery from SD Card option.

Update Recovery From SD Card Android

Step 7 -- Click the Update.zip from your Android's SD Card to begin the firmware installation process.

Flash Firmware Via Recovery

Step 8 -- The processes will take about a few minutes to complete, once done, just choose Reboot System Now option.

Reboot System Now Recovery

Well done because you have successfully installed the stock ROM firmware on your Android smart device.


Notes


{1}. Make backups. Do not forget to make necessary backups toward your existing personal data before installing the stock ROM.

{2}. Install original IMEI. Once you have done installing the stock ROM then you need to install the original IMEI if it's included in the firmware zip file.

{3} If you want more firmware, then you are invited to visit our Alcatel stock ROM firmware page.

{4}. Credits go to the Alcatel for providing this stock ROM firmware.


EmoticonEmoticon